Stable,solid,long-lasting for cutting slabs and thickness of marble,stone and granite. 

• The table rotates with brushless motors and can be positioned with accuracy to the hundredth. 
  
  
• Blade-holder slide on bearings runs on brushless motors. Interchangeable rail levels with guards. 
  
  
• The speed of the electric spindle with a reduced-size motor is controlled by an electronic rev. variator which is connected directly to blade. 
  
  
• Up/down movement of brushless motorised blade head unit runs on precision screws and double lead nuts to eliminate play. Unit runs on refaced chrome guides protected from dust/water by blowers. 
  
  
• The head inclination is motorised and the automatic stops are displayed in hundredths and degrees. Small inclined step-cuts with interpolation of the vertical and horizontal axes. 
  
  
• Water-tight electrical cabinet placed outside foundations, with main switch, CNC/LCD electronics and keyboard. 
  
  
• Five axes are numerically controlled and run by the PC where new programmes and single runs can be applied. 
  
  
• Mobile control panel can be moved to centre table when machine not in use. 
  
• Right-left movement of slide, bridge back-forward movement, up/down head movement, table rotation can be carried out manually.. 
  
  
• Laser beam facilitates positioning of blade on cutting line. 
  
  
• Flow meter stops the machine if cooling water insufficient. Tools protected by load bearing device to prevent use above present values. 
  
  
• All cooling tubes and electrical wiring for tools protected in special holders. 
  
  MAIN CNC FUNCTIONS
  
  
• Running of horizontal and vertical cutting axes of head cutting unit, bridge translation and automatic turntable. 
  
  
• Table rotation. 
  
  
• Running of electronic inclination for head cutting unit. 
  
  
• Programmes for single stroke marble cutting/small step-cutting for granite and cutting depths. 
  
  
• 20 different cutting translation levels repeatable 99 times can be set (more on request).
   
  
• Memorises and electronically sets cutting limits and cut/return or cutting unit.
  
  
• Memorises and electronically sets beam travel limits. 
  
  
• Cut/return speed and last cut with different setting. 
  
  
• Table inclination of automatic table programmable for continuous circular and/or orthogonal cuts. 
  
  
• Execution of single or partial cuts. 
  
  
• Reduction of stoppage time thanks to possibility of contemporary movement of all axes.
  
  
• Lateral profiling set directly at keyboard: concave/convex arches, rising/descending surfaces - any angle. 
  
  
• Profile cutting achieved with linear and circular interpolation of vertical/horizontal axes
  of head cutting unit. 
  
  
• Finishing cycle of pieces with disc side ('brush' system obtained by interpolation of z-y axes with x cutting axis strokes. )
  
  
• Rough hollowing and finishing, concave and convex cycles obtained by interpolation
  of x-z axes with y axis strokes. 
  

• Automated operational cycles: presence of operator not required. 
  

  • CAD-designed profiles and shapes on specific programme complete with converter for reading CAD/CAM ISO programmes and connected externally by series RS 232 (optional).

Corsa disco asse X - X-axis blade stroke (d. 900)	mm	3.700
Translazione ponte asse Y - Y-axis bridge translation	mm	3.500
Diametro max. disco - Max. diameter blade	mm	900
Diam. albero portadisco - Blade holder shaft diameter	mm	60/50
Diam Flangie bloccadisco - Minimum diameter of flanges	mm	250
Profondità max. taglio (Z) - Z-axis maximum cutting depth	mm	320
Corsa verticale asse Z - Z-axis max. vertical stroke	mm	600
Rotazione max. testa asse A - A-axis max. head rotation	gradi degrees	100
Potenza motore disco a 950 - Motor power at 950 revs.	kW	26
Dimensioni tavola in ghisa - Cast iron table dimensions	mm	3500x1750
Velocità max. asse X - X-axis max. speed	mm/min	18.000
Velocità max. asse Y - Y-axis max. speed	mm/min	8.000
Velocità max. asse Z - Z-axis max. speed	mm/min	2.500
Voltaggio/frequenza - Voltage/Frequency	V/HZ	380/50
Peso - Weight	Kg	5.000