Handling equipment
There are two differents types of derricks: Super Derrick type
DKS with electronic speed control loads 30-40-50 tons up to
70 mt, and the derrick type DK continues with mechanical gear
boxes loads 20-25-30 tons up to 50 mt.

Double beam gantry
The frame of the gantry crane includes two built-up box beams made pf electro-welded steel plates with inner stiffening ribs.
The beams are connected at both ends and supported by legs built up under the same pattern as the beams. Beams and legs
are bolded together by high tensile steel bolts and the joints easy assembling and disassembling. Once assembled it forms a very solid and touigh structure. Every single element, whether primary or secondary, has been thoroughly tested with regard to yield point, stress and elestic instability. One of the legs is fitted with a ladder leading to an inspection "walkaway" which runs along one beam and is made of a walking surface with railing and footguard.

Rotoblock fix 40
This machine is an absolute new among the block tilting machines field, allowing the rotation of the blocks of the marble or granite on their own axis, up to 90°. The basic
feature are the very reduced dimensions, just a little bigger than those of the block to be rotated. The use of this simple and solid machine can be performed by one operator only.
Very easy to handle and to be positioned and fized on the ground, it is also very easy to transport and can be used either in processing plants
or in quarries.

Self propelled transfer car
Type CAT 60, load 60 tons; when associated with marble and granite gang.saws enables fast machine turn-round thus increasing operative efficiency.

Single beam gantry crane GCM
The load bearing box-beam, built with sheet steel with inner stiffering ribs, makes this a very solid and resistant structure.
The materials used are of the highest quality and the sections have been carefully designed in accordance with safety regulations.
The advanced technique of handling, lifting and displacing facilitates a gentle start followed by a gradually increasing speed, consequently saving on engine thrust and cutting maitenance costs. The compact design puts to the best possible use all the space available.

Twin beam overhead travelling crane "GPB"
The main structure of the overhead travelling crane consists of two load bearing box-beams of electro-welded sheet steel with inner stiffening ribs.