Block Marble Cutting

It's with the PLC command an has been working full automatic. It has been indicating to working hours in the shiftand cutting workpiece number too. Cabin running with the kremayer. Cutting prezision is 26 m / hours. In our machines is used the material appropriate to CE norms.

Horizontal Splitting

It separates two pieces as sensitive the cutting metarials by means of water machine. It sees the thicnen of will cutting piece with the electronic system. The belt speed of the machine in 0-4 m/min for taking twice ST the manifacturers who is thinking take twice ST is recommended this machine.

Disc Cutting

They are machines is produced with one or multi saw that the half product is sized as sensitively before and after producting in split machine that cutting metarials the ST machines. In our machines is used PLC at MDC series cutting sensitiveness are ± 0.1 mm.

Calibrating and Polishing

Our the machines that producing at the various head numbers are produced with heavy and light chasis. The contorl of our machines can be half and full automatic. In our half automatic model moving down and up of polishing heads has been making with hand. This moving at the full automatic machines is maked with PLC command. The polishing capasity according to its modell and used product in 8 hours 2500-1300 m²

Chamfering Lines

Our machines that various head numbers producting makes chamfering and polishes front face in same time it can up side, down side and front face on channel. Also it can work up brrom in 7.5 cm. too. Machine's moving is maked to PLC command. The belt speed of the machine in 0-4 m/min.

The Edge for Polishing Abrasive Heads 4/6	Chamfering of the Lover Edge 45° Polishing Heads 0/2
Chamfering of the Upper Edge 45° Polishing Heads 0/3	Chamfering of the Lover Edge 45° Diamond Calibrating Heads
The Edge for Profile Calibrating Heads	The Diamond Disc for Upper Groove
The Diamond Disc for Edge Groove	The Diamond Disc for Lover Groove