WIZARD WORK STATION  
Radial Arm Edge Shaping & Face Polishing Machine

Features and Benefits:

Machine Capabilities

• Face Polisher...The WIZARD WORK STATION is an excellent Radial Arm Piece Polisher. It has precise head pressure control and speed to make polishing or honing every easy and fast. It does an excellent job on granite, marble and limestone. This feature can be used to clean up scratches in the face surface. It can also be used to polish the back side of rough slabs.
•  Edge Shaper...The WIZARD WORK STATION can do inside and outside radiuses. Roller balls are not needed to keep the tool in contact with the edge. That means no face scratching or need to cover and protect the polished face of the work piece. Use your existing tools to apply ogee and bullnose edges on straight or curved edges.
• Coring Machine...The WIZARD WORK STATION can get to those hard to reach island sinks. The air flow control valve allows anyone to learn how to cut a fixture hole without blowouts or chipping of the polished surface. Coring is also the smart way to cut out the sink hole corners. You will get better stock removal with less risk of over cutting.
• Stock Remover...The WIZARD WORK STATION is easy to handle. Operator fatigue is not a concern like it can be with hand held tools. The arm is balanced for easy handling and a light touch by the operator.
• Undermount Sink Processor...The WIZARD WORK STATION saves and improves the vertical edge. This technique will need to be practiced by your operator. You will cut the time spend on undermounts in half. The diamond vanity drums available from many suppliers come with different degrees of quality. Bring the edge up to the machine standard you determine. Your hand tools are used to finish the job to your quality standard.
• Drainboard Cutter and Polisher...The WIZARD WORK STATION provides your clients with the latest in market trends. Your shop will be distinguished as being able to do it all. By following the template guide, cutting drainboard depressions is simple. The center water feed again makes this process easy for anyone. Successive polishing pads bring the drainboard up to a polish. Hand work will be needed to touch up the light ridge between the drainboard and the polished face. The flat part of the drainboard can be cut and polished in less than an hour.

Park Industries 6301 Saukview Drive St. Cloud, MN 56303 Telephone: (320) 251-5077 Toll Free: (800) 328-2309 Fax: (320) 251-8126 Website : www.parkind.com